Купил через ebay у китайцев осциллограф Hantek DSO5102P, за 320$. Таможне пришлось отдать 30% цены.
Model
|
DSO5202P
|
DSO5102P
|
DSO5072P
|
Bandwidth
|
200MHz
|
100MHz
|
70MHz
|
Real-time Sample Rate
|
1GSa/s
| ||
Equivalent Sample Rate
|
25GSa/s
| ||
Record Length
|
24K
| ||
SEC/DIV Range
|
4nS/div-40S/div (in a 2, 4, 8 sequence)
| ||
Delay Time Accuracy
|
500ps
| ||
Vertical
| |||
A/D Converter
|
8-bit resolution, each channel sampled simultaneously
| ||
VOLTS/DIV Range
|
2mV/div~5V/div at input BNC
| ||
Position Range
|
±50V(5V/div),±40V(2V/div~500mV/div),±2V(200mV/div~50mV/div)±400mV(20mV/div~2mV/div)
| ||
Rise Time at BNC
|
≤1.7ns
|
≤3.5ns
|
≤5ns
|
DC Gain Accuracy
|
±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div±3% for Sample or Average acquisition mode, 5V/div to 10mV/div
| ||
Trigger System
| |||
Trigger Sensitivity
(Edge Trigger Type) |
DC: 1div from DC to 10MHz;1.5div from 10MHz to 100MHz; 2div from 100MHz to 200MHz;
EXT: 200mV from DC to 40MHz EXT/5:1V from DC to 40MHz AC: Attenuates signals below 10Hz HF Reject: Attenuates signals above 80kHz LF Reject: Attenuates signals below 150kHz Noise Reject: Reduces trigger sensitivity | ||
Trigger Level Range
|
CH1,CH2: ±8 divisions from center of screen
EXT: ±1.2V EXT/5: ±6V | ||
Trigger Level Accuracy,
typical (Accuracy is for signals having rise and fall times ≥20ns) |
CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen)
EXT: ±(6% of setting + 40mV)
EXT/5: ±(6% of setting + 200mV) | ||
Holdoff Range
|
100ns-10s
| ||
Trigger Type
| |||
Edge
|
Trigger on the rising or falling edge
| ||
Pulse Width
|
Trigger (when >,<,=,≠) on positive or negative pulses
Pulse Width Range: 20ns-10s | ||
Video
|
Trigger on an NTSC, PAL, or SECAM standard video signal
Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM) | ||
Slope
|
Trigger (when >,<,=,≠) on a positive or negative slope
Set Time: 20ns–10s | ||
Overtime
|
from the rising or falling edge
Set Time: 20-10s | ||
Alternate
|
Internal trigger on edge, pulse width, video or slope
| ||
Measurement
| |||
Cursors
|
Manual: The difference between voltage cursors △V; the difference between time cursors △T; 1/△T calculated by Hz.
Tracing: The voltage and time at a waveform point; | ||
Automatic(32)
|
Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH、FRF、FFR、LRR、LRF、LFR、LFF
| ||
Display
| |||
Type
|
Right angle 7"TFT 16-digit color LCD
| ||
Resolution
|
800*480 dots
| ||
Contrast
|
16 gears, with the progress bar to show adjustment
| ||
Interface
|
USB host and USB slave
| ||
Power Supply
| |||
Voltage
|
100-120VACRMS(±10%),45Hz to 440Hz,CATⅡ
120-240VACRMS(±10%),45Hz to 66Hz,CATⅡ | ||
Power
|
Fuse
2A, T rating, 250V
Mechanical
Size
Length: 313mm Width: 108mm Height: 142mm
Weight
2.08KG (exclusive of packing and accessories)
Комментариев нет :
Отправить комментарий